FablabSU

Ceci est une ancienne révision du document !

---

EmonLibrary examples openenergymonitor.org, Licence GNU GPL V3 #include “EmonLib.h” Include Emon Library EnergyMonitor emon1; Create an instance int led = 8; void setup() { Serial.begin(9600); pinMode(led, OUTPUT); emon1.current(1, 111.1); Current: input pin, calibration. }

void loop() {

double Irms = emon1.calcIrms(1480);  // Calculate Irms only

Serial.print(Irms*230.0);	       // Apparent power
Serial.print(" ");
Serial.println(Irms);       // Irms
//delay(1500);

if (Irms*230 > 60) {

digitalWrite(led, HIGH);   // turn the LED on (HIGH is the voltage level)
}

else {

digitalWrite(led, LOW);   // turn the LED on (HIGH is the voltage level)
}

}