FablabSU

Ceci est une ancienne révision du document !

---

// EmonLibrary examples openenergymonitor.org, Licence GNU GPL V3

#include "EmonLib.h"                   // Include Emon Library
EnergyMonitor emon1;                   // Create an instance

int led = 8;

void setup()

{  
Serial.begin(9600);
pinMode(led, OUTPUT);
emon1.current(1, 111.1);             // Current: input pin, calibration.
}

void loop()
{
double Irms = emon1.calcIrms(1480);  // Calculate Irms only

Serial.print(Irms*230.0);	       // Apparent power
Serial.print(" ");
Serial.println(Irms);       // Irms
//delay(1500);

if (Irms*230 > 60) {
digitalWrite(led, HIGH);   // turn the LED on (HIGH is the voltage level)
}
else {
digitalWrite(led, LOW);   // turn the LED on (HIGH is the voltage level)
}
}